Astro Luga IP44 Bathroom Wall Light

Product Information:

Luga IP44 bathroom wall light. A simple white glass wall light designed to direct light both up and down.

This light fitting is suitable for use in a bathroom within regulated zone 2 or higher.

Zone 2 is the area 60cm away from the edge of the bath or shower tray and 60cm radius from the taps on a sink.

This light fitting has an IEC protection class of 2, double insulated.

This light has an International Protection Rating of IP44.

The first digit gives this light protection against contact and ingress of objects >1 mm in size.

The second digit shows a protection of the equipment inside the enclosure against ingress of splashing water.

This light is fitted with a pull cord switch for off and on control.

This light can also be wired to a wall switch, though if the pull cord is set to off the wall switch will have no effect. If you do not require the pull cord switch you may cut it, however be sure the light works and is switched to on before doing so.

This light requires 1 bulb(s) of the same type:1 x G9 Capsule (Included) Max Bulb Wattage = 40W Bulb Voltage = 240VThis product requires an input voltage of 240V.

This light fitting is not suitable for installation onto a dimmer controlled circuit. If using a main light switch or dimmer for your bathroom you may want to disable the fitted pull cord switch to avoid confusion.

This can be done by having the light switched ON and then cutting the pull cord off.

The Luga range by Astro Lighting includes a selection of wall lights in this style.

There is a non IP rated version suitable for installation outside of a bathroom, a low energy version and a version that is supplied with a UK plug and trailing cable.

Click here to see full product information